AST GEWZ38ES AST Bearing

E:10 mm; A1:19 mm; L:65 mm; s1:15.5 mm; N:M8; d:15 mm; C:12.8 kN; Dz:54 mm; T max.:100 °C; T min.:-40 °C;

D1:139.1 mm; Max operating temperature, Tmax:120 °C; B:24 mm; Fatigue limit load, Cu:2.2 kN; Da max:142 mm; Dynamic load, C:59.4 kN; da max:110.5 mm; da min:108 mm; Nlim:5,700 rpm; d1:110.5 mm;

C:12.8 kN; d1:32.4 mm; J:78 mm; Designation of housing:FCE204-; A1:8 mm; T max.:100 °C; B:34 mm; N:9mm; Recommended tightening torque for set screw:5.5 Nm; L:100 mm;

Designation of housing:PG210N-; Recommended tightening torque for set screw:16.8 Nm; A1:35 mm; Z:24.5 mm; C:35.1 kN; J:95 mm; Designation of bearing:UC210-31G2L3; H2:114 mm; A:60 mm; T max.:100 °C;

static load capacity:94500 N; UNSPSC:31171547; EAN:4547359139402; bore diameter:65 mm; Brand:NTN; Mass (without HJ ring):1.11 kg; precision rating:ISO Class 0; Internal Clearance:C3-Loose; finish/coating:Uncoated; F:79.6 mm;

H1:12.5 mm; G:M6x1; T min.:-20 °C; J:94.5 mm; N:11mm; A1:22.5 mm; Weight:0.75 kg; A:32 mm; Z:63.5 mm; B1:43.5 mm;

Bearing Family:Setscrew Ball Bearin; Max Bearing Speed:3600 rpm; Housing Material:Cast Iron; Bearing Inner Ring Material:Steel; Bearing Series:210 Series; Seal Type:Triple Lip; Anti-Rotation Pin:Yes; Housing Type:Narrow Slot Take-Up; Bearing Outer Ring Material:Steel; Grease Type:Mobilith SHC PM 220

Bearing Bore Shape:Tapered; Grease Type:Mobilgrease XHP222; Seal Type:Triple Lip; UPC:782476772789; Housing Type:2 Bolt Pillow Block; Expansion Type:Non-Expansion; Bearing Locking Device:Setscrew; Brand:Baldor-Dodge; Bearing Series:215 Series; Setscrew Angle:65;

Ring Size:Standard; Bearing Bore Shape:Round; End Cap Groove:No; Retainer Material:Nylon; Flinger Material:None; Max Bearing Speed:6500 rpm; Bearing Locking Device:Setscrew; Housing Coating:Powder Coat; Self Aligning:Self Centering; Housing Material:Cast Iron;

Designation of bearing:UC205-14G2L3; H:142 mm; s1:17 mm; Designation of housing:FLE206N-; e:19 mm; Recommended tightening torque for set screw:3.7 Nm; C0:7.88 kN; d:22.22 mm; Weight:0.71 kg; C:14 kN;

d1:82 mm; d:60 mm; s1:39 mm; B1:49.3 mm; L1:52 mm; N:M16; S:12 mm; E:25 mm; Designation of bearing:ES212G2T20; C0:32.8 kN;

T max.:100 °C; s1:21.45 mm; Designation of bearing:UC207-20G2T04; J:127 mm; N:17mm; H2:140 mm; L1:56 mm; T min.:-40 °C; A1:30 mm; Designation of housing:PH207N-;

S:17.4 mm; C0:7.88 kN; B:34.8 mm; Z:17.2 mm; s1:30.9 mm; Designation of housing:PA205N-; N:M10; d1:37.4 mm; d:25 mm; A:38 mm;

C0:18.2 kN; L2:16 mm; Designation of housing:T208-; B1:46 mm; A1:16 mm; T max.:100 °C; T min.:-20 °C; N2:49 mm; L:144 mm; C:29.6 kN;

H:47.6 mm; H1:20 mm; N:M12; C:25.7 kN; B:25.4 mm; Weight:1.63 kg; T min.:-40 °C; Designation of closed end cover:SCCE207; Recommended tightening torque for set screw:11.5 Nm; s1:30.2 mm;