FAG 713630730 FAG Bearing

B:62 mm; E:260 mm; Category:Bearings; Inventory:0.0; Characteristic outer ring frequency, BPF0:5.73 Hz; Product Group:B04144; Characteristic inner ring frequency, BPFI:8.27 Hz; Max operating temperature, Tmax:120 °C; Weight / Kilogram:21; d:140 mm;

Characteristic outer ring frequency, BPF0:3.59 Hz; da max:19 mm; Nlim (grease):15,000 rpm; Mass:0.03 kg; f0:13.9; Fatigue limit load, Cu:0.13 kN; Radial clearance class:CN; Static load, C0:2.83 kN; Max operating temperature, Tmax:110 °C; Dynamic load, C:5.6 kN;

C0:11.2 kN; Designation of bearing:UC206-20G2T04; T min.:-40 °C; T max.:100 °C; B:38.1 mm; N:M10; d:31.75 mm; H:42.9 mm; L:98 mm; E:12.5 mm;

Designation of bearing:UC211-32G2T04; T max.:100 °C; Z:76.8 mm; L1:106 mm; H1:130 mm; H2:102 mm; T min.:-40 °C; H:146 mm; Designation of open end cover:SCOU211-32; G:M6x1;

N:29mm; A1:16 mm; C0:23.2 kN; A5:32.6 mm; L1:90 mm; N1:19 mm; s1:25.8 mm; SW:5 mm; L3:86 mm; B:51.6 mm;

Recommended tightening torque for set screw:11.5 Nm; d:35 mm; S:18.3 mm; B1:51.6 mm; T max.:100 °C; C1:7.2 mm; G:M8x1; C0:19.2 kN; B2:17.5 mm; SW:4 mm;

B:51.6 mm; L:135 mm; A1:34 mm; T min.:-40 °C; J:101.6 mm; Designation of closed end cover:SCC210; Dz:100 mm; N:M16; E:20 mm; H2:115 mm;

Category:Single Row Ball Bear; Dynamic load, C:33.5 kN; bore diameter:35 mm; row type & fill slot:Single Row Non-Fill; Minimum Buy Quantity:N/A; Weight / LBS:1.01; bore type:Round; Characteristic outer ring frequency, BPF0:3.06 Hz; Static load, C0:19.1 kN;

Ship Weight:7.2 LB; Grease Type:Mobilgrease XHP222; Housing Series:107 SERIES (106 - 10; Brand:Baldor-Dodge; Bearing Series:107 Series; Bearing Bore Shape:Tapered; Seal Type:Triple Lip; Shaft Attachment Type:SETSCREW; Setscrew Angle:65; Expansion Type:Expansion;

Max operating temperature, Tmax:200 °C; b:10 mm; Mass:7.75 kg; ra max:2 mm; Y2:4.77; Y0:3.13; Characteristic inner ring frequency, BPFI:14.37 Hz; Static load, C0:893 kN; Nlim:3,100 rpm; Radial clearance class:C4;

L1:90 mm; L:145 mm; A2:40 mm; B:51.6 mm; C:35.1 kN; C0:23.2 kN; s1:25.8 mm; G:R1/8"; T max.:200 °C; SW:4.76 mm;

A:37 mm; Designation of housing:T207N-; Recommended tightening torque for set screw:8 Nm; A1:12 mm; Z:59.1 mm; T min.:-40 °C; C:25.7 kN; L:129 mm; Weight:1.59 kg; L3:64 mm;

A2:55 mm; Designation of bearing:US209G2T20; B:41.2 mm; d:45 mm; T min.:-20 °C; Recommended tightening torque for set screw:11.5 Nm; T max.:200 °C; Dz:95 mm; A1:13 mm; C:31.85 kN;

Designation of housing:C209-; d1:65 mm; d:38.1 mm; C:31.85 kN; H:110 mm; Weight:1.64 kg; T min.:-20 °C; A:31 mm; B1:50 mm; s1:26 mm;

L:137 mm; S:10.2 mm; Z:33.4 mm; C0:20.8 kN; A2:53 mm; T max.:100 °C; Designation of housing:F209N-; J:105 mm; Designation of bearing:US209-27G2; N:16mm;